Roof bars kit for a Toyota Land Cruiser 78 3 doors / mont

The roof bars with a gutter mounting system can be used to transport equipment on the roof of your vehicle if you do not need a complete gallery. This kit contains 4 190mm gutters feet, 2 roof bars of 1425mm, 1 10mm wind baffle and an installation guide. The kit contains all the necessary components to mount the roof bars on a vehicle with gutters.It may not need a complete gallery and that you find that you can get out using a roof bar kit Front Runner.neut to be used to mount a Runner roof tent or other accessories where a low profile and a reduced footprint are preferred. The roof bars are mounted directly on the gutters using gutter mounted feet. Use the same slats of Strong and corrosion aluminum that the Slimline II Galleries Front Runner.The sliding grooves of the nut allow quick mounting and removal of accessories and equipment on the top and bottom of the lattes. The roof bars and the roof bars and Gutter mounting feet can be used in the future as components to build a complete Runner roof gallery. Fabricated from stainless steel and aluminum coated with durable black powder and weather resistantries.Comprend All equipment, components and installation guide needed to install the roof bars on a vehicle.
Note: The maximum load must not exceed 55 pounds or 25 kg per roof bar. In addition, you need to make sure that the load is evenly distributed. For larger loads, additional roof bars may be needed. Please contact customer service for any questions.
Note: A maximum driving speed of 130km / h