Roof Bar Kit for Toyota Land Cruiser 75/79 / Po Mounting

The roof bars with a gutter mounting system can be used to transport equipment on the roof of your vehicle if you do not need a complete gallery. This kit contains 4 feet for 130mm gutters, 2 1425mm roof bars, 1 10mm wind baffle and an installation guide. The kit contains all the necessary components to mount the roof bars on a vehicle with gutters.It may not need a complete gallery and that you find that you can get out using a roof bar kit Front Runner.neut to be used to mount a Runner roof tent or other accessories where a low profile and a reduced footprint are preferred. The roof bars are mounted directly on the gutters using gutter mounted feet. Use the same slats of Strong and corrosion aluminum that the Slimline II Galleries Front Runner.The sliding grooves of the nut allow quick mounting and removal of accessories and equipment on the top and bottom of the lattes. The roof bars and the roof bars and Gutter mounting feet can be used in the future as components to build a complete Runner roof gallery. Fabricated from stainless steel and aluminum coated with durable black powder and weather resistantries.Comprend All materials, components and installation guide needed to install the charging bars on a vehicle
.Note: This roof bar solution is not suitable for the Toyota Land Cruiser 75 Troopy Edition. A suitable roof bar kit KRTL038 is available.
Note: The maximum load must not exceed 55 pounds or 25 kg per roof bar. In addition, you need to make sure that the load is evenly distributed.